Filter
Top Products
6-6 STATIONS ALLOWED ACCESS TO MAKE/BREAK OUTPUT (FUNCTION CODE 57)
STATIONS ALLOWED ACCESS TO MAKE/BREAK OUTPUT
Step 1
Touch
Function Code
New Registration ?
Allowed Station No. ON
Touch
Allowed Station No. ON
Touch
Confirmation tone
New Registration finished ?
Release ?
Allowed Station No. OFF
Allowed Station No. OFF
Touch
Confirmation tone
Release finished ?
Return
NOTES
1. To register all stations at one time,
Touch
10 times
(Confirmation tone will be heard.)
2. To release all registered stations at one time,
Touch
10 times
(Confirmation tone will be heard.)
3. Re-start at Step 1 when mis-dialing occurs.
(All other registrations remain valid.)
4. Station No. should be 2 digits in length when 2 Digit
Dialing function is employed.
5. Programming is necessary only if CPU DIP switch
D-3 is "ON". Switch D-6 must be "ON" to employ
this function.
Touch
– 27 –