Filter
Top Products
CUSTOMIZING
Page 96
Contents
Index
CHECKING YOUR SERIAL TABLET CONNECTION
Select the CONNECTION tab to check the status of your tablet connection to the serial port.
When checked, the tablet driver is on.
Displays all serial ports. The port in
use by the tablet is selected. Ports
used by other devices are dimmed.
Single tool mode at maximum data rate.
Required by some handwriting recognition
software.
Displays messages about your selected serial port.
•CONNECTED. The tablet is connected and responding correctly.
•NOT RESPONDING. There is no communication between the tablet
and the computer.
•OVERRIDDEN. Another application has taken over control of the
serial port.
•DRIVER OFF. The Intuos2 driver is turned off.
Recommended for graphics applications.
In SINGLE MODE, the tablet will support only
one input tool. Do not place two tools on the
tablet at the same time.