Filter
Top Products
16
Chapter 2
Resetting the Printer
Resetting the Printer to Factory
Default Settings
1. Turn on the printer and wait for approximately 5 seconds.
2. Press the “Feed” button for 10 seconds. The “Ready” indicator and
“Power” indicator will go off in order.
3. When the two indicators become lit again, release the feed button.
4. At this moment, the printer will feed 12 inches of label stock, and will reset
itself to the factory default settings.
Note: All settings are stored in non-volatile EPROM and cannot be erased when
the printer is turned off.