Filter
Top Products
030-300381 Rev. A 145 January 2004
User Guide
UltraLine Home DSL Router
(
Models 7400, 7401
)
belongs to your local network.
DHCP Start Address (If
DHCP is enabled for
Private LAN)
This setting specifies the start of the IP address pool that the Router uses to
assign IP addresses to local devices.
DHCP End Address (If
DHCP is enabled for
Private LAN)
This setting specifies the end address of the IP address pool used for automatic
configuration of local devices.
DHCP Lease (If DHCP is
enabled for Private LAN)
This setting specifies the DHCP lease time.
Protocol
Protocol
Protocol This screen informs the Router which networking protocol to use when
communicating with your ISP. This information is provided by your ISP.
Public LAN
This screen contains the settings that control how the ADSL router interacts with the local devices connected to the
router. It is not recommended that these settings be changed. The following settings are displayed.
Public LAN
Public LAN DHCP Server
Enable
Dynamic Host Configuration Protocol (DHCP) is an Internet standard that
allows the ADSL router to automatically assign IP addresses to devices
connected on the LAN network. It is advised that this is enabled for Private
LAN.
Public LAN Enable This setting enables the Public interface. This feature allows a global subnet to
exist behind your Router.
Modem IP Address This controls the IP address that the ADSL router uses for local
communication.
Subnet Mask This setting specifies the subnet mask to use to determine if an IP address
belongs to your local network.
DHCP Start Address (If
DHCP is enabled for
Public LAN)
This setting specifies the start of the IP address pool that the Router uses to
assign IP addresses to local devices.
DHCP End Address (If
DHCP is enabled for
Public LAN)
This setting specifies the end address of the IP address pool used for automatic
configuration of local devices.
DHCP Lease (If DHCP is
enabled for Public LAN)
This setting specifies the DHCP lease time.