Filter
Top Products
Config Window – MAC Access Control Panel
This feature lets you limit access to the network through the access point. You can
list up to 1000 stations that are to be granted or denied access. A drop-down box lets
you select the method of access control:
• Disabled: Disable MAC-address access control. This is the default setting.
• Accepted List: Only wireless stations whose MAC addresses are on the list
are allowed to connect through the access point.
• Denied List: Wireless stations whose MAC addresses are on the list are
prevented from connecting through the access point.
To add a wireless station to the list, click the New MAC Address icon (a sheet of
paper with one corner folded) on the left side of the MAC Access Control panel. You
will be prompted to enter:
• The wireless station’s MAC address.
• A name for the station.
Figure 15. Config window — Mac Access Control panel
Wireless stations registered in the MAC Address Control Table can be individually
turned on or off. For example, if you have enabled the Accepted List option, you can
check the Not Use box for any listed station; the status of this station’s entry will be
26
Outdoor Access Poin
t