Filter
Top Products
2-4
The groups in the keypad Setup Menu contain the following setup parameters:
Setup Group Parameter Setup Group Parameter
RF Setup
RF Terminal ID
Date/Time
Set Time
0 RF Channel 3 Set Date
Security Code
Date Format
Skip opening screens
Display of Year
Battery
Recharging or Not
Bar Codes
Code 3 of 9 4
1 UPC/EAN
Code 2 of 5/I 2 of 5
Speaker
Speaker Volume
2 of 5 Length 5 Headphone Volume
Code 128 Beep Tone
Codabar
MSI/ Plessey
Other
Shut Down Time
Code 11 6 Preamble
Code 93 Postamble
RSS-14 Voice Messages
Laser Options
RS232
Baud Rate Aiming Dot Duration
2 Protocol Automatic Check Back
Parity Control Keys Only
Data Bits LCD Display Mode
Stop Bits LCD Backlight
LCD Backlight Duration
Once you have selected a group to edit, you will see each parameter
displayed in the order listed above. Use the next section of this chapter as a
reference for all RF Terminal Setup Parameters, whether they are
configured using the keypad or the bar coded Setup Menu. Each parameter
is followed by either a key symbol:
and the group you will find the parameter in,
or a bar code symbol:
or both, depending on how the parameter can be configured.
R
F
Setup