Filter
Top Products
Page 6 RS2321X8 Serial Router
Figure 4: Connecting to the SmartPad LCD™ Controller
E
NABLING THE RS2321X8 ROUTER:
Note: Refer to Figure 5 for Software Configuration.
1. Start Dragon Drop-IR (SPLCD) Software and open a new or existing project.
2. Click on the OPTIONS Tab.
3. Click on the RS232 Settings Button.
4. Click on the Enable Router check box
.
You can now configure each of the 8 ports of the router individually to communicate with 8 different Serial devices.
© 2005 Xantech Corporation