Filter
Top Products
SCPI Command Reference
SCPI Command Summary
Release 2.1 107
Table B.4Commands for Current Share
Table B.5Commands for Calibration
Table B.6Command to Clear all Protection Mechanisms
Set High Voltage Limit
[[:]SOURce][<channel>]:VOLTage:LIMit:HIGH
{<voltage>|MAXimum|MINimum}
Set upper limit of voltage setpoint range (soft
limits)
Yes
Set Low Voltage Limit
[[:]SOURce][<channel>]:VOLTage:LIMit:LOW
{<voltage>|MAXimum|MINimum}
Set lower limit of voltage setpoint range (soft
limits)
Yes
Function
SCPI Command
Description Query
Set Current Sharing Mode
[[:]SOURce][<channel>]:COMBine:CSHare:MODE
{NONE|MASTer|SLAVe}
Select current share mode Yes
Read Summed Current
[:]MEASure[:SCALar]:CURRent[:DC]? SUM
Read total current output of all current
sharing supplies
N/A
Function
SCPI Command
Description Query
Restore Factory
ion
[:]
CALibration[<channel>]:RESTore
Restonres the calibration to the constants set
at the factory
N/A
Change Calibration
Password
[:]
CALibration[<channel>][:SECure]:CODE <codeword>
Changes the calibration security code. No
Set Calibration State
[:]
CALibration[<channel>][:SECure]:STATe
<on-off-state>,<codeword>
Change calibration state (mode) Yes
Set Supply Output Current
Level
[:]
CALibration[<channel>]:OUTPut:CURRent:LEVel
{MINimum|MAXimum}
Set output current calibration level No
Enter Output Current Data
[:]
CALibration[<channel>]:OUTPut:CURRent[:DATA]
<current>
Set output current calibration data No
Set Supply Output Voltage
Level
[:]
CALibration[<channel>]:OUTPut:VOLTage:LEVel
{MINimum|MAXimum}
Set voltage output calibration level No
Enter Output Voltage Data
[:]CALibration[<channel>]:OUTPut:VOLTage[:DATA]
<voltage>
Set voltage output calibration data No
Function
SCPI Command
Description Query
Clear Output Protection
[:]OUTPut[<channel>]:PROTection:CLEar
Clears the protection mechanism. N/A