Filter
Top Products
Ethernet (ENET)
2-12 M370078-06
Assigning an IP Address to the Power Supply Unit
If your system is auto-IP configured, the following warning message is
displayed:
To assign an IP address to the power supply unit:
1. Click OK to dismiss the Auto-IP warning message. If you are not
intending on using an Auto-IP, debug your network connection at this
time.
The Lantronix DeviceInstaller window appears. See Figure 2-15.
Figure 2-13
Selecting Network Adapter
Figure 2-14
Auto-IP Address Message
Important:
Auto-IP mode is acceptable only for the single computer and
single power supply configuration.