Xantrex Technology Solar 400 Power Supply User Manual


 
Recharging the Powerpack Solar 400 Battery
975-0328-01-01 13
Figure 3-1
Charging with AC Power
Note: The Battery Charge (%) reading on the digital display is
only accurate after the Powerpack Solar 400 has been
disconnected from all appliances and all charging sources for 15
minutes.
1. Press and hold the AC button for one
second to turn off the AC sockets.
2. Check that the indicator light is off.
3. Press and hold the DC/USB and
Lamp buttons for one second to turn
the DC socket, USB port, and the
Lamp off.
4. Check that the indicator light is off.
5. Insert the AC Charger plug into the
AC charging port.
6. Insert the AC Charger into a
household 120 Vac outlet.
7. Check the Charging Status indicator
light.
1.
3.
Note: A flashing light indicates that the unit is
charging the battery. A solid light indicates that
the battery is fully charged and on stand-by.