Xerox 1200 Scanner User Manual


 
3 Lift the tab and insert negatives or positives for scanning.
Make sure the image is facing down. To avoid getting unwanted fingerprints
on the film, wear gloves designed for handling film.
4 Make sure the film is aligned properly in the slot.
Hold the film guide up to a source of light to check for openings where
light leaks through. The edges of the film must be parallel to the edges of
the slot. If you are scanning negatives, even a small gap that allows light
through perforations on the film can cause overexposure (halation) of the
scanned image.
Lift the tab and slide the
film into the guide. The
image should face down.
Negative or positive film
144
Chapter 10