Filter
Top Products
For more information on Genuine Xerox Supplies, call 1-800-822-2200 in the USA and 1800-668-0133 in Canada 7
3) Run job to the offset catch tray, remove small stacks (25 sheets at a time), fan the sheets,
and then re-stack. This would require operator intervention.
4) Run stock SEF (short edge feed) with and without the fan. Printing speeds will be reduced.
Tinted Stocks
When running tinted stocks, color rendition will be dependent upon the shade chosen. Although the
DFE (digital front end) RIP (raster image processor) has the ability to calibrate to a white background,
it cannot do so with tints. The resulting printed colors may not match those selected on your screen.
Please verify that color rendition meets your requirements before committing to a production scale
run.
Window Decals
Window decals are a composite product involving a film material and backing sheet. When the
backing is peeled away, a tacky surface combined with static allows the material to “cling” to glass
and other smooth surfaces. Applications include signage as well as window displays. For best
results, it is recommended to run Xerox Window Decals in the 151-220 gsm range out of SMH tray 3
only. Due to the nature of this product, static may limit it’s ability to stack neatly in the OCT (offset
catch tray) or other output devices.
Cut Quality & Paper Trimming Recommendations
Proper cutting of the paper to be used is critical. Mills offering paper in cut sizes will convert papers
using state of the art rotary slitters on high performance systems. Slitting and edge trimming by
circular knives with dust removal at every cutting point help to prevent contamination issues.
Trimming papers from parent sheets to get the desired output size may generate dust if dull knifes
are used. The recommendation is to delay trimming until printing has been finalized to prevent paper
dust generation and contamination issues.
If pre-printing trimming is imperative, special care must be taken to ensure that any loose fibers are
removed before the paper is loaded into the machine trays. By thoroughly fanning the sheets and
wiping down the edges with a cloth, most of these contaminants can be removed; however, an in-
house maintenance program, including blade maintenance and dust removal with a vacuum or air
system, will be key in achieving good results.
Plastic Film Laminations over Printed Images
There are a number of variables that will effect the quality of laminated color output. The laminating
technology that presently yields the best results for DocuColor 2045 / 2060 / 5252 output is as
follows:
Single Side Lamination
− GBC Orbit 2000 production laminator and Eagle 65 table top single side roll type laminators