Filter
Top Products
Xerox Document Centre 220/230/332/340 Setup Guide Page 6-15
Auditron Setups
Auditron Setups
Foreign Interface Device
A Foreign Interface Device might be a coin-operated device,
a bill acceptor, a card reader, or a network controlled
tracking system installed on the system. The device must
initially be enabled by the Xerox representative.
NOTE: This device controls only Copier print services and
has no bearing on the Fax services.
Access Auditron Setups as described on Page 6-2.
Touch the Foreign Interface button. Make selections as
required - a description of each follows.
Off to specify that a Foreign Interface Device is not connected.
Per-Page Control to set the device for tracking each page in each job
separately. For example, for a coin-operated device, set
External Auditron to Per-Page Control. Otherwise, more
than the current page will be printed, even though only one
coin was inserted.
Monitor to set the device to track the usage of the machine, but not
to limit users to a number of copies or prints.
Quick Pathway
Press the Access
button on the Control
Panel
Touch the # button on
the Control Panel
Enter Auditron
Administrator PIN - see
NOTE
Touch Auditron Setups
Touch Foreign
Interface.