Filter
Top Products
Page 11-84 Xerox Document Centre 440/432/430/426/425/420 User Guide
Foreign Interface Device
A Foreign Interface Device might be a coin-operated device, a
bill acceptor, a card reader, or a network controlled tracking
system installed on the system. The device must initially be
enabled by the Xerox representative.
This device controls Copier print services only.
¾ Access Auditron Setups. Refer to “Access Auditron Setups”
on page 11-68 for more information.
¾ Select [External Control Device]. Make selections as
required - a description of each follows.
NOTE: The default password is #22222 which may be used if
PINs have not yet been assigned.
Off to specify that a Foreign Interface Device is not connected.
Per-Page Control to set the device for tracking each page in each job separately.
For example, for a coin-operated device, set External Auditron
to Per-Page Control. Otherwise, more than the current page
will be printed, even though only one coin was inserted.
Quick Pathway
¾Select
[Access] on the
Control Panel
¾Select [#] button on the
Control Panel
¾Enter Auditron
Administrator PIN -
see NOTE
¾Select [Auditron
Setups]
¾Select [External
Control Device]