15
Customized Install
You can define Image Retriever program defaults during
installation.
To install Image Retriever with customized defaults, install only
OmniPage and PaperPort with the Scan to PC Desktop installer.
Then browse to the IR70PRO/SE folder on the CD, and launch
setup.exe from the command line with the desired parameters.
Configuration options and the corresponding parameters are as
follows:
User interface language: specify the Image Retriever user
interface language with the /L parameter.
Default watched folder: specify the default watched folder
Parameter: WATCHFOLDER=<path_to_the_folder_name>
You can specify any path here, provided that you have write
access to the chosen folder. Image Retriever path syntax
supports mapped drives and UNC standards as well.
Folder watching: enable or disable folder watching
Parameter: FOLDERWATCH=[0...1] .
The value 1 is accepted only if you also specify a valid watched
folder via the WATCHFOLDER parameter.
Value: Behavior
1033 English (factory default)
1031 German
1034 Spanish
1036 French
1040 Italian
1046 Brazilian Portuguese
Value: Behavior
0 disable folder watching
(factory default)
1 enable folder watching