9
Transfer documents to
To specify where Image Retriever is to place the retrieved files,
click Browse and choose a PaperPort folder. If the target folder
has folder notes (subject, author, and keywords) then these will
be applied to the files delivered by Image Retriever. In such a
case, the corresponding folder setting in PaperPort
(“Automatically add keywords from Folder Notes“) has no effect.
OK Button
Click OK in the “Image Retriever Settings” dialog box to confirm
Image Retriever settings.
Get Now command
Use this command for the same purpose as the corresponding
button in the “Image Retriever Settings” dialog. For details see the
Get Now button.
Use Defaults command
Use this command for the same purpose as the corresponding
button in the “Image Retriever Settings” dialog. For details see the
Use Defaults button.
Run PaperPort
minimized
Same as above, but PaperPort runs
minimized. (Later, when you open
PaperPort, all scanned documents will be
on the PaperPort desktop.)
Don’t run
PaperPort
Documents are transferred into the target
folder (the one you have specified under
Transfer documents to), but are not placed
on the PaperPort desktop until you launch
PaperPort.
Select this
setting: To get this result: