Filter
Top Products
XES Synergix 8825/8830 Printer Operator Manual 13
MEDIA INFORMATION
Loading the Rolls of Media
16. Center the lead edge of the
media in the registration window.
15. Squeeze the two knobs on the
Baffle and lower the Baffle into
place.
12. If the lead edge of the roll is torn
or uneven, trim off the lead edge
of the media.
NOTE: Trimming is usually not
necessary for a new roll of media.
13. Squeeze the two knobs on the
Baffle and lift up to open the
Baffle.
14. Rotate the media roll to feed the
media under the Baffle and
beyond the registration window
(A).
NOTE: Ensure that the lead edge of
the media is flat and is not folded
over itself.
A