Filter
Top Products
XES Synergix 8825/8830 Printer Operator Manual 26
OFF-LINE MENUS
Printer Menu - Diagnostics
1. When DIAGNOSTICS is displayed on the Control Panel, press the Enter
button to display the first feature.
2. Press the Enter button to select the <TEST PLOT> feature.
DIAGNOSTICS
<TEST PLOT>
3. Press the Next (or Previous) button in order to scroll through the available
settings (Roll 1, Roll 2 (Optional for the 8825), Roll 3 (Not available for the
8825), BYPASS (Optional for the 8825).
4. Press the Enter button in order to enter your selection, or
press Exit if no change is required.
5. Press the Exit button in order to return to the DIAGNOSTICS submenu.
NOTE: There are two other features in the submenu that are reserved for the
Service Representative. The diagnostic feature is protected by a password.
TEST PLOT
PRINT FROM <ROLL x>