Filter
Top Products
XES Synergix 8825/8830 Printer Operator Manual 19
OFF-LINE MENUS
Printer Menu
The printer has two off-line menus that customize the printer to meet your
particular application.
The Printer Menu allows you to customize the printer to meet your special
requirements. The Controller Menu (available only on Printers with a
Controller installed) allows you to configure the controller to meet your
specific requirements.
The Printer Menu contains six submenus, with one or more features per
submenu, that allows you to control the operation of the printer:
1. Audible Indicators: This submenu has two features which activate an
audible beeper for system events and keypad
actuation’s.
2. Timers: This submenu sets the time intervals for the Power
Saver and Rest mode.
3. Printer Adjustments: The print density can be increased or
decreased.
4. Finisher Settings: This submenu enables you to specify the finisher
configuration type.
5. Diagnostics One of the three features allows you to run a test
print in the off-line mode. Another feature displays a
record of printer faults. A third feature is for use by
the Service Representative and is password
protected.
6. Billing Meters These two meters provide records of the length and
area of prints produced.