Filter
Top Products
XES Synergix 8825/8830 Printer Operator Manual 18
MANUAL BYPASS FEED
The Manual Bypass Feed is standard equipment for the 8830. The Manual Bypass Feed is optional equipment for the 8825
• When the correct media is not
loaded for an incoming print job,
you may manually bypass the
media drawers and load cut-sheet
media of the required size on the
Cut Sheet Feed-In Shelf.
• Minimum size is 8.5 X 11 inch (A4)
fed Short-Edge-Feed (SEF).
1. Raise the Output Tray (A) up and
out of the way.
2. Center the media between the
size indicators on the Cut Sheet
Feed-In Shelf (B).
3. Feed the lead edge of the media
squarely into the printer until the
media stops.
A
B