Filter
Top Products
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL 9
3. Media
This chapter provides the following information:
• A listing of the ways in which the printer notifies you when a
media roll is low or empty
• The procedure for loading roll media into the media drawers
• The procedure for specifying the media size and type for each
media drawer
• The procedure for bypassing the media drawers and manually
feeding cut sheets into the printer
• An explanation of the automatic roll switching feature
• Tips for safe storage of your printer media.
For information about the media sizes and types that the printer
can accommodate, refer to the "Technical data" chapter of this
manual.
When a media roll empties
When a roll media drawer has less than 30 feet of media or is
empty, the printer alerts you in the following ways:
• The applicable indicator light on the graphic display flashes.
• If you submit a job requiring the empty media source, the
alarm beep (if enabled) sounds once and the message display
instructs you to install the required media.
• If a job is printing and the media roll empties, the alarm beep
(if enabled) sounds steadily and a C[1,2,3].04 or C[1,2,3].05
status code and a message instructing you to re-feed the roll
appear in the display.
• If you press the Media key and scroll to the applicable media
source, the message display advises you that the media roll is
low or empty.