Filter
Top Products
MAINTENANCE 4–24 DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE
1
2
3
4
5
6
7
Replacing the Cleaning Web
When a message is displayed to replace the
Cleaning Web (Figure 41), follow the instructions
provided on this page in addition to those on the
labels near the Cleaning Web affixed to the copier/
printer.
WARNING: The fuser can be very hot. To avoid
personal injury, do not touch any components
other than those indicated in the following proce-
dure.
1
Open the Front Door of the copier/printer.
2
Rotate the Paper Path Module Handle clockwise,
to the down position.
3
Pull the Paper Path Module out of the copier/
printer until it is fully open, as illustrated in
Figure 42.
Figure 41: Check the Cleaning Web message
Figure 42: Pulling out the Paper Path Module