Filter
Top Products
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE 3–3 TOOLS MODE
1
2
3
4
5
6
7
Entering and Exiting Tools Mode
Entering Tools Mode
KEY POINT:
• All previous programming selections are
canceled when you press the Clear All button
in the Tools Mode.
• You cannot program jobs while in the Tools
Mode.
1
Press the Administration button (Figure 2) above
the numeric keypad to display the Access screen,
illustrated in Figure 3.
2
Touch the Tools button to display the Tools
Access Number screen, as illustrated in Figure 4.
Figure 2: Administration symbol
Figure 3: Access screen
Figure 4: Tools Access Number screen