Filter
Top Products
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE 4–13 MAINTENANCE
1
2
3
4
5
6
7
4
Grasp the Developer Waste Container with your
right hand. Pull the Developer Waste Container
completely out of the copier/printer, as illustrated
in Figure 21.
5
Remove the gold cap from the front of the used
Developer Waste Container, as illustrated in
Figure 22.
6
Securely push the gold cap over the opening on
the back of the waste container, as illustrated in
Figure 23, to prevent developer beads from
spilling out.
Figure 21: Removing the old
Developer Waste Container
Figure 22: Removing the cap
Figure 23: Placing the cap on
the waste container