Filter
Top Products
ACCESSORIES 12–12 DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
12
Adding staples
1
Open the stapler by grasping the cover at the two
indentations on the upper right and left side and
pulling it straight up and back (Figure 10).
2
Pull the empty cartridge out by holding the gold
handle at the top tabs and pulling the cartridge
straight out (Figure 11). Dispose of the cartridge
according to local regulations.
3
Align the new cartridge so that the bottom white
tabs are on the bottom edge of the metal bracket
and below the black plastic side arms.
4
Push the cartridge firmly to the back until the
cartridge clicks into place.
5
Close the cover by moving it down until it clicks
close.
Figure 10: Opening the stapler
Figure 11: Removing the cartridge