Filter
Top Products
GETTING TO KNOW YOUR DOCUCOLOR 12 2–6 DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
2
9 Clear (C) - Pressing the Clear (C) button during a
programmed job run cycle will cancel the job and
reset the number of completed copies or sets
back to 0. At this time all preselected features will
be retained and you are allowed to add or remove
selected features for a period that will not exceed
20 seconds. After 20 seconds the programming
features selected for the cancelled job return to
the default values. Use this button in the following
cases:
• To clear the copy quantity that was selected
and to reset the quantity to 0.
• To restore the copier/printer to the
programming condition when a fault or a jam
occurs and a message displays on the Touch
Screen.
• For a period not to exceed 20 seconds you
can add or remove program selections without
clearing the previous selections. (Only the
copy quantity that was selected is reset to 0.)
• To cancel all the information previously
entered and display blank fields ready for new
data entry on the Access Number Entry
screen.
When the Clear button is selected while the
copier/printer is in Interrupt mode, it is applied
only to the interrupting job.
When the Clear button is selected with the
Stored Job feature, it is applied only to the
selected job.
NOTE: Clear is not applied if a job is incomplete
or the machine is displaying a Jam or Interlock
Open screen.
C