Filter
Top Products
13
(
LED On Continuously)
•
System Error
– Press and hold the Printer Control button for
at least 2 seconds. If the LED begins to flash, there is a system
error. Unplug the power at the back of the unit for at least 10
seconds, then reinsert the power cord back into the back of the
unit. If the problem still persists, contact the Xerox Customer
Support Center.
LED Blinking Intermittently
(0.2 sec On, 1.4 sec Off)
An intermittently blinking LED can indicate the following:
•
Data in Buffer
– Press and release the Printer Control button
to print out the data resident in the printer memory.