Filter
Top Products
58
The print quality of transparencies is poor
Cause Suggested Solution
The wrong type of transparencies
was used.
Use transparencies made for ink
jet printers only.
Transparency
is not selected for
the
Paper type
option on the
Paper/Output
property page.
Make sure
Transparency
is the
selected
Paper type
option on
the
Paper/Output
property page.
If the problem continues, select
the
Page Setup
command from
the application that you are using
to open the
Paper/Output
property page, and select the
Transparency
option located in
Paper type
.
The document was printed on the
wrong side of the transparency
film.
Remove the transparencies from
the paper tray, turn the sheets
over, and reinstall the sheets in
the tray. Refer to the instructions
for the transparency to see which
side is the printable side.
Multiple transparencies are
stacked in the paper output shelf.
When printing multiple
transparencies, remove each
transparency from the paper
output shelf after it has been
printed.