Filter
Top Products
COLORWISE PRO TOOLS 17
Configuring the connection
The first time you start ColorWise Pro Tools, you must configure the connection to the
EX8002.
BEFORE YOU BEGIN
• Print the Configuration page and note the IP address of the EX8002.
For instructions on printing the Configuration page, see Configuration and Setup.
This page contains information that you need when configuring the connection, such as the
IP address. For TCP/IP installations, you can use the Domain Name Server (DNS) name of
the EX8002 instead of the IP address. Make sure that the EX8002 is listed in a DNS used by
your network. For more information, see the documentation that accompanies your
Windows system.
TO CONFIGURE THE CONNECTION FOR COLORWISE PRO TOOLS
1 Start ColorWise Pro Tools.
2 If the Choose Printer Device dialog box appears, click Add.
3 Enter the appropriate information for the EX8002.
Nickname
: Type a name for the EX8002. This name does not have to match the actual Server
Name of the EX8002.
NOTE: The nickname cannot contain a Tab character.
Server Name or Server IP address: Type the IP address (or DNS name) of the EX8002.
New Device: Type a device name for the EX8002. This name does not have to match the
device name of the EX8002.