Filter
Top Products
COLORWISE PRO TOOLS 34
Assigning Device Link Profile settings
The following Device Link Profile Settings dialog box images depict an RGB Source profile
description. If you use a CMYK Simulation profile, the screen will reflect a CMYK
Simulation profile description instead of an RGB Source profile description.
TO ASSIGN DEVICE LINK PROFILE SETTINGS
1 After you download the Device Link Profile using Profile Manager and add it to the Device
Link Profile panel, select the source and output profiles for this Device Link Profile in the
Device Link Profile Settings dialog box.
If the Device Link Profile already has a source and output referenced, the Output and Source
Profiles automatically appear.
If the source or output profile referenced in the Device Link Profile is not found on the
EX8002, the source profile will show “Unassigned” and a message appears, stating that the
source or output profile cannot be found.
Click Information to find out more about the missing profile.
If you install the source or output profile to the EX8002 that matches the missing profile
referenced in the Device Link Profile, the “Unassigned” setting is automatically updated.
NOTE: If the source or output setting is unassigned, the Device Link Profile cannot be used.
You must assign settings.