Filter
Top Products
2-26 Installing Windows Printer Drivers
10 Expand the Override/Restore Defaults option on the Device Settings tab.
11 Select Save Current Settings as Default. A Save button appears.
12 Click Save. The configuration and device settings are saved as the default
settings.
13 If you want to modify the default document settings, continue with the following
steps. Otherwise, close the Properties dialog and continue with step
14.
a) Do one of the following:
For 2000/XP drivers, select the General tab and click Printing Preferences.
The Printing Preferences dialog opens.
For NT drivers, close the Properties dialog. Right-click the printer and select
Document Defaults.
b) Make your selections from the available tabs.
c) Select the Advanced tab.
d) Expand the Override/Restore Defaults option.
e) Select Save Current Settings as Default. A Save button appears.
f) Click Save to save each setting on every tab of the printer driver as the
default setting.
14 Click OK to close the Printing Preferences dialog and the Properties dialog in
2000/XP or click OK to close the Document Defaults dialog in NT.
15 Copy the driver filename.dyc file created on your workstation in the
\Windows\System32\Spool\Drivers\W32x86\3 directory (for XP),
\WinNT\System32\Spool\Drivers\W32x86\3 directory (for 2000,
\WinNT\System32\Spool\Drivers\W32x86\2 directory (for NT).
16 Paste the driver filename.dyc file from your workstation to the driver installation
directory on the server to overwrite the driver filename.dyc file on the server with
the new file that contains the preconfigured driver default settings.
Any drivers installed from this directory will now contain the default settings you
selected.