WorkCentre Pro 555/575 A-13
FCC Regulations
Send Header Requirements
Federal Communications Commission (FCC) regulations require all
persons within the United States who send any message via a
facsimile machine to include an identifying message in the
transmission. The message must clearly contain an identifier and
telephone number for the entity (business or individual) sending the
message.
This facsimile machine provides the local ID and name features
required for the FCC regulation. To satisfy the FCC regulation, the
telephone number and name must be included with the printed
document. To comply with the FCC rules, carefully read and follow
the instructions listed in this document to program the local ID and
name.
Data Coupler Information
This Xerox WorkCentre Pro 555/575 machine contains an internal
data coupler. Its use is restricted by the FCC (Federal
Communications Commission). To comply with the FCC rules, you
must carefully read and follow the instructions listed below.
This equipment complies with Part 68 of the FCC rules. On the rear of
this equipment is a label that contains, among other information, the
FCC registration number and Ringer Equivalence Number (REN). If
requested, provide this information to your telephone company.
The REN is useful to determine the quantity of devices you may
connect to your telephone line and still have all of those devices ring
when your number is called. In most, but not all areas, the sum of the
RENs of all devices should not exceed five (5.0). To be certain of the
number of devices you may connect to your line, as determined by
the REN, you should call your local telephone company to determine
the maximum REN for your calling area.
WARNING
Ask your local telephone company for the modular jack type
installed on your line. Connecting this machine to an
unauthorized jack can severely damage telephone company
equipment. You, not Xerox, assume all responsibility and/or
liability for any damage caused by the connection of this
machine to an unauthorized jack.