Filter
Top Products
Advanced PPPoE
Figure 8. Advanced PPPoE
Settings - Advanced PPPoE
WAN Port
PPPoE Session
Select the desired Port and Session, then click the “Select” button. The data for the selected Port/Session will then be displayed in the
WAN IP Account section.
WAN IP Account
• User Name – Enter the PPPoE user name assigned by your ISP.
• Password – Enter the PPPoE password assigned by your ISP.
• Verify Password – Re-enter the PPPoE password assigned by your ISP.
• IP Address – If you have a fixed IP address, enter it here. Otherwise, this field should be left at 0.0.0.0.
• Host Name – This field is used by a Host to uniquely associate an access concentrator to a particular Host request.
Action
Use the “Connect” and “Disconnect” buttons to establish or terminate a connection on this session.
Connection Status
This displays the current connection status for each session.
The screen is required in order to use multiple
PPPoE sessions on the same WAN port.
It can also be used to manually connect or
disconnect a PPPoE session.
19