XiNCOM XC-DPG602 Network Card User Manual


 
Chapter 9 - Operation & Status
Operation & Status Overview
Once both the XC-DPG602 and the PCs are configured, operation is automatic. However, there are some
situations where additional Internet configuration may be required (Refer to Chapter 4 - Advanced Features for
further details)
System Status
WAN Information
Connection Status – Current status – either “Connected” or “Not connected”.
Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE, or PPTP.
Force Renew button– Only available when using a dynamic IP address (DHCP). Clicking this button will perform a DHCP
“Renew” transaction with the ISP’s DHCP server. This will extend the period for which the current WAN IP address is
allocated to you.
IP Address – The IP address of the XC-DPG602 when seen from the Internet. This IP Address is allocated by the ISP
(Internet Service Provider).
Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
Domain Name IP Address – The address of the current DNS (Domain Name Server).
MAC Address – The MAC (physical) address of the XC-DPG602 when seen from the Internet.
LAN Information
IP Address – The LAN IP Address of the XC-DPG602.
Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
MAC Address – The MAC (physical) address of the XC-DPG602 when seen from the local LAN.
DHCP Server – The status of the DHCP Server function - either “Enabled” or “Disabled”.
Device Information
Firmware Version – Version of the Firmware currently installed.
NAT – Status of the NAT feature – either “Enable” or “Disable”.
Load Balance – Status of the Load Balance feature – either “Enable” or “Disable”.
Virtual Server – Status of the Virtual Server feature – either “Enabled” or “Disabled”.
Special Applications – Status of the Special Applications feature – either “Enabled” or “Disabled”.
DMZ – Status of the DMZ feature – either “Enabled” or “Disabled”.
Block URL – Status of the Block URL feature – either “Enable” or “Disable”.
Hardware ID – The manufacturers ID for this particular device.
Device Statistics
System UpTime – The time since the system of a device was last re-initialized.
CPU Usage – The current usage percentage of CPU.
Memory Usage – The current usage percentage of Memory (Heap & Queue).
Buttons
Refresh – Update the data on screen.
Restart – Restart (reboot) the XC-DPG602.
Restore Factory Defaults – This will delete all existing settings, and restore the factory default settings.
XC-DPG602
Twin WAN DNS IP Gateway
Chapter Contents
• System Status
• Restore Factory Defaults
• WAN Status
• LAN Status
43