Filter
Top Products
21
Advanced configuration
LAN Setting
The screen enables user to configure the LAN & DHCP Server, set WAN parameters, create
Administrator and User passwords, and set the local time, time zone, and dynamic DNS.
LAN & DHCP Server
This page leads to set LAN and DHCP properties, such as the host name, IP address, subnet mask,
and domain name. LAN and DHCP profiles are listed in the DHCP table at the bottom of the screen.
Host Name: Type the host name in the text box. The host name is required by some ISPs. The
default host name is "AP-Router."
IP Address: This is the IP address of the router. The default IP address is 192.168.1.1.
Subnet Mask: Type the subnet mask for the router in the text box. The default subnet mask is
255.255.255.0.
DHCP Server: Enables the DHCP server to allow the router to automatically assign IP addresses to
devices connecting to the LAN. DHCP is enabled by default.
All DHCP client computers are listed in the table at the bottom of the screen, providing the host name,
IP address, and MAC address of the client.
Start IP: Type an IP address to serve as the start of the IP range that DHCP will use to assign IP
addresses to all LAN devices connected to the router.
End IP: Type an IP address to serve as the end of the IP range that DHCP will use to assign IP
addresses to all LAN devices connected to the router.
Domain Name: Type the local domain name of the network in the text box. This item is optional.
WAN
This screen enables user to set up the router WAN connection, specify the IP address for the WAN,
add DNS numbers, and enter the MAC address.