Filter
Top Products
25
Wireless
This section enables user to configuration the wireless communications parameters for the WLAN
Router.
Basic
This page allow user to enable and disable the wireless LAN function, create a SSID, and select the
channel for wireless communications.
Enable/Disable: Enables and disables wireless LAN via the WLAN Router.
SSID: Type an SSID in the text box. The SSID of any wireless device must match the SSID typed
here in order for the wireless device to access the LAN and WAN via the router.
Channel: Select a transmission channel for wireless communications. The channel of any wireless
device must match the channel selected here in order for the wireless device to access the LAN and
WAN via the router.
Super G mode: From the drop list, if you like to use Super-G
TM
to enhance the speed, there are
three options on Super-G
TM
mode: Super G without turbo; Super G with Dynamic turbo and Super G
with Static turbo. The turbo mode indicates the combination of two channels to enhance the
throughput. Super G without turbo indicates that it is on Super G mode without the channel’s
combination. Dynamic turbo is able to automatically detect if any ‘Super-G
TM
based’ product is
available. If no, the connection is via ‘normal’ G. Static turbo means it will not go back to ‘normal’ G
once it starts.
Extended Range Mode: Enable or Disable the eXtended Range(XR) function.
SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able to communicate
with the WLAN Router. For secure purpose, user may want to disable SSID broadcast to allow only
those wireless clients with the SSID to communicate with the WLAN Router.