Filter
Top Products
28
Advanced
This screen enables user to configure advanced wireless functions.
Beacon Interval: Type the beacon interval in the text box. User can specify a value from 1 to 1000.
The default beacon interval is 100.
RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes
data flow. If data flow is irregular, choose values between 256 and 2346 until data flow is normalized.
Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error
rates are high, choose values between 256 and 2346 until packet transfer rates are minimized.
(NOTE: set this fragmentation threshold value may diminish system performance.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box. User can
specify a value between 1 and 65535. The default value is 1.
TX Rates (Mbps): Select one of the wireless communications transfer rates, measured in megabytes
per second, based upon the speed of wireless adapters connected to the WLAN.
11g only mode: If selected the Enable, only allow 802.11g WLAN client communicate with this
WLAN Router.
Antenna Transmit Power: Adjust the power of the antenna transmission by selecting from the
dropping list for full, half (-3dB), quarter (-6dB), eighth (-9dB) or min.