Filter
Top Products
33
Routing
This selection enables user to set how the router forwards data: Static and Dynamic. Routing Table
enables user to view the information created by the router that displays the network interconnection
topology.
Static
It enables user to set parameters by which the router forwards data to its destination if user’s network
has a static IP address.
Network Address: Type the static IP address user’s network uses to access the Internet. User’s ISP
or network administrator provides user with this information.
Network Mask: Type the network (subnet) mask for user’s network. If user does not type a value
here, the network mask defaults to 255.255.255.255. User’s ISP or network administrator provides
user with this information.
Gateway Address: Type the gateway address for network. User’s ISP or network administrator
provides user with this information.
Interface: Select an interface, WAN or LAN, to connect to the Internet.
Metric: Select which metric that user want to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom of the page.
Update: Select one of the entries in the static IP address table at the bottom of the page and, after
changing parameters, click “Update” to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of the page and click
“Delete” to remove the entry.
New: Click “New” to clear the text boxes and add required information to create a new entry.
Dynamic
This screen enables user to set NAT parameters.