Yamaha CRW2100SX Computer Drive User Manual


 
Front and Rear of Unit
Rear Panel
The CRW2100SX drive’s rear panel features the following:
SCSI
CDR ID
AC IN
SER. NO.
st2
❋❋❋❋❋❋❋❋
TERMINATOR
ONOFF
LINE OUT
RL
SCSI
1
Serial number sticker
This consists of 3 letters
and 7 digits. You may
need to refer to this number
when requesting User
Support services. (P.11)
AC IN socket
Connect the included
power cable here. (P.20)
TERMINATOR switch
This enables the drive’s
built-in SCSI termination.
Switch this to “ON” if your
drive is the last device on
the SCSI chain. Otherwise,
switch it to “OFF.” (P.13)
LINE OUT (L/R)
To listen to audio CDs with
your drive, connect these to
the line-level input (LINE IN)
of your stereo equipment
using a standard stereo
phono cable (sold
separately).
CDR ID selector switch
The drive’s SCSI ID number
is shown in the switch’s
window. Press the button
above the window to
decrement the SCSI ID
number, or the button
below the window to
increment it. (P.12)
SCSI connectors
Connect either of these to
your computer’s SCSI card
using the SCSI cable. The
other connector can be
used as a pass-through
when daisy-chaining more
SCSI devices to it. It can
be left vacant if your drive
is the last device on the
SCSI chain and is
terminated. (P.20)
8