Filter
Top Products
Setup Procedures
23
3 Double-click “YAMAHA CRW2100S” listed under “CDROM” (in Windows
95/98/98 Second Edition) and click the Settings tab. Check the “Sync data
transfer” checkbox. With “Sync data transfer” enabled, the data transfer
between your CRW2100SX drive and your computer is synchronized,
meaning that the maximum possible data transfer rate can be achieved.
n For details, refer to the documentation that came with your SCSI card.
n When using Windows NT/2000, “Sync data transfer” will automatically be selected
if the SCSI card supports this feature. You will not need to change this setting.
* This is a screen shown in the Windows 98
Second Edition environment.
4 Install the CD writing software.
n For details about how to install and use the software, refer to the documentation
that came with it.
Macintosh Users
To check that the CRW2100SX drive is recognized correctly, you will need to use
the Apple System Profiler.
1 When your CRW2100SX drive and computer have powered up, install the CD
writing software.
n The installer simplifies the installation process. For details about how to install the
software, refer to the documentation that came with it.
2 Restart your computer.
3 Start your CD writing software.
4 Check that the CRW2100SX drive is recognized correctly.
n For details about how to use the software, refer to the documentation that came
with it.