Filter
Top Products
33
Menu
9
English
Menu items
◆ Signal
You can adjust the image when the unit is receiving an input signal.
Display Aspect Ratio
(Input signal)
Video/S-Video/Component/RGB TV/RGB PC
Sets the aspect ratio for projecting an image from an input signal.
See “Selecting a display aspect for projecting images”, page 22.
Overscan
(Input signal)
Video/S-Video/Component/RGB TV
Overscans video input sources for display.
Selects from [Standard] and [Full]. This parameter is not available when you select [Smart
Zoom] in [Display Aspect]. In some cases, noise may appear at the edges of the image
when you select [Full].
• [Standard] : approximately 94% video output ratio
• [Full] : approximately 100% video output ratio
3D Y/C Separation
(Input signal)
Video(NTSC)
Adjusts the quality of images input from VIDEO jack.
Suppresses the rainbow-like color and annoying dots in images. This function is only
available for NTSC format signals the unit receives at its composite input jacks.
Choices: On/Off
Progressive Mode
(Input signal)
Video/S-Video/Component/RGB TV
Switches the interlace/progressive (I/P) conversion mode.
(Only for interlaced TV signal).
• [Auto] : Detects the video, film and computer graphics (CG) contents and converts into
optimized progressive frames automatically.
•[Video] : Force to convert using motion-adaptive I/P conversion for video contents only.
• [Film] : Force to convert using pulldown I/P conversion for film or CG contents
only. Not recommended to use this mode unless a content consists of the
progressive frames clearly.
Color Space Conversion
(Input signal)
Video/S-Video/Component
Selects color space coefficients.
• [Auto] : Selects the best color space coefficient for the image resolution.
• [SDTV] : Color space coefficient for BT.601 type signal.
• [HDTV] : Color space coefficient for BT.709 type signal.
Setup Level
(Input signal)
Video/S-Video/Component/RGB TV
Compensates for differences in the black levels of images.
•For signals equal to the pedestal level : Set to [0%].
•For signals with high levels of blackness: Set to [7.5%].
100
0
%
PEDESTAL LEVEL BLACK LEVEL
13_DPX-1300_E.p65 9/20/05, 5:08 PM33