Zebra Technologies 2824-Z Printer User Manual


 
38 LP 2824-Z User Guide 980531-001 A
Maintenance
Cleaning
Sensors
Dust can accumulate on the media and head-up sensors.
1. Gently blow away dust; if necessary, use a dry swap to brush away dust. If adhesives or
other contaminates remain, use an alcohol moistened swab to break up.
2. Use a dry swab several times to remove any residue that may be left from the first cleaning
.
Linerless Media
If you use linerless media in your application, sticky residue can build up quickly on the
media-path knobs and edge guides; dust and debris then accumulates in this sticky residue.
Make certain to clean these areas as needed.
Head-Up
Sensor
Media
Sensors