Zebra Technologies 2824-Z Printer User Manual


 
52 LP 2824-Z User Guide 980531-001 A
Troubleshooting
Resetting the Factory Default Values
Resetting the Factory Default Values
Sometimes, resetting the printer to the factory defaults solves some of the problems. Follow
the four-flash sequence instructions in “Feed Button Modes” later in this chapter
Communications Diagnostics
If there is a problem transferring data between the computer and printer, try putting the printer
in the communications diagnostics mode. The printer will print the ASCII characters and their
respective hexadecimal values (a sample is shown below) for any data received from the host
computer. To find out how, refer to the power off mode procedure in “Feed Button Modes”
later in this chapter.