42 LP 2824-Z User Guide 980531-001 A
Maintenance
Replacing the Print Head
Thermal-Transfer LP Model
Before following the steps in this procedure, open the printer by pulling the release latches
forward then lifting the top cover.
Removal
1. Grasp the print head spring and pull it to the left; then, slide it free of the carriage.
2. Use the spring to pry the print head clip off the right side of the carriage.
3. Pull the print head and bracket forward.
4. Use a #2 Phillips driver to remove the screw that holds the ground wire.
5. Unplug both bundles of print head wires from their connectors.
A B
C