Filter
Top Products
83
ZebraLink WebView
Alert Setup
04/19/2007 ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 14197L-001 Rev. A
9. Enter a valid email address to send the alert messages to.
10. Click Add Alert Message.
To receive email alert, you must give 10/100 Internal PS the IP address of your mail server
that is running SMTP.
11. To save current settings, click Save Printer Setting.
12. Enter the password and click Save Current Configuration.
13. You can continue to add more Alerts, if finished:
• From the Printer Home Page, select
PrintServer Settings > Network Communications
Setup
.
•Click SMTP Email Alerts.
• Specify your SMTP server address.
When these steps are done, you can begin receiving email notification messages.
Example • admin@yourcompany.net (The Port field can be ignored for
email setup.)
Important • A password is required. If you forget to enter the password, the alerts you just
set are deleted.
Note • The SMTP Server address might be referred to as Mail Server address.