Filter
Top Products
1918
19
6.2.4 Zap menu
Zap menu
The Zap menu is used to assign functions to
the zap keys on the remote control. The menu
consists of two columns of buttons where the
left column assigns the functions to the left
key and the right column assigns the functions
to the right key.
Note:
Un-selecting all boxes for Zap 1 assigns the
“Zap 1’ button on the remote to Power-up
the projector from stand-by mode.
Un-selecting all boxes for Zap 2 assigns the
“Zap 2” button on the remote to function
as the Power-down (stand-by) button.
Pointer
You can activate the pointer function in the
projector. One click activates the pointer and
the next click deactivates it.
Blank
Activates blank mode by pressing the Zap key.
First click will activate Blank mode and second
click will deactivate it.
Computer
Selects Computer as the source.
Video
Selects video sources. Both Zap keys can be
programmed to select Video.
6.2.5 Show accumulated lamp time
Show accumulated lamp time
In this window you can see the accumulated
time that the lamp has been in use. You also
use this window to reset the accumulated lamp
time after the lamp has been replaced.
6.2.2 Language
Language selection
This menu allows you to choose between six
different menu languages: English, French,
German, Italian, Spanish and Norwegian.
Click in the box next to the language you want
to use. Click on the OK button. The window
will disappear, and the selected language will
be used in the main menu and in all other
menus.
6.2.3 Quick menu
Quick menu settings
In the quick menu you can assign functionality
for the quick key on the remote control. When
clicking on the quick key you will be able to
switch between all the functions you have
selected in this menu. You adjust the bar by
either pressing the pressure-sensing pad right
or left or you may use one of the two zap keys
on the remote control. To accept the adjust-
ment, and terminate the quick menus click on
the left mouse button. To get back to the orig-
inal setup, click on the right mouse button.
The next click on the quick key will accept the
adjustment and activate the brightness func-
tion and a brightness bar will be shown at the
bottom of the page. When you have gone
through all assigned functions the menu will
disappear.
18