Filter
Top Products
Installing Your USB Faxmodem 5
Confirming the Installation
Your computer should be turned on.
1
Windows 98SE/Me users:
From the computer’s desktop, go
to
Start | Settings | Control Panel
and double-click the
Modems
icon.
Windows 2000 users:
From the computer’s desktop, go to
Start | Settings | Control Panel | Phone and Modem Op-
tions
and then click the
Modems
tab.
Windows XP users:
From the computer’s desktop, go to
Start | Control Panel | Printers and Other Hardware
and
double-click the
Phone and Modem Options
icon and then
click the
Modems
tab.
•
If prompted, enter your location information.
•
Click the entry for your modem and then click
Properties
.
•
Set the
Maximum speed
to the highest speed available
(probably 115,200). This sets the speed at which the
computer communicates internally with the modem.
2
Click the
Diagnostics
or
Modem
tab. Click
More info
or
Query Modem
. If displayed, make a note of the
Port
and
Interrupt
entries (if displayed). This step also tests the mo-
dem. You will see a list of AT commands and responses,
indicating that your new modem is properly connected.
IMPORTANT:
If you already had a modem installed in your com-
puter, you’ll need to redirect your application software so that it rec-
ognizes your new modem. Please turn to page 15 for instructions.
Otherwise, continue below.
Tip:
If your modem is not working, try turning off your computer and
restarting it. If restarting your computer doesn’t work, please
consult the
Troubleshooting
section on page 15.