Filter
Top Products
Chapter 2: Advanced Setup Options 31
WAN side HTTP server
Disabled by default.
HTTP server port
Port number with Web access; for ex., if
you change it to 1001, the HTTP server
address on the LAN side would be
http://10.0.0.2:1001.
DHCP Relay
Disabled by default. Enabling this feature
forces all local PCs’ DHCP requests to be
forwarded to the WAN DHCP server.
Important: Be sure to disable the LAN
DHCP server (navigate back to the
Advanced Setup
page and
LAN Settings
to do so; see page 20 for instructions).
IGMP Proxy
Disabled by default. Select enable, then
navigate back to the
Advanced Setup
page and
WAN Settings
to set up your
IGMP proxy. See page 19 for instructions.
PPP reconnect on WAN
access
Disabled by default. Enabling this feature
ensures that the PPP session is
automatically established when a packet is
ready to be transferred over the WAN.
PPP Half Bridge
Disabled by default. Enabling this feature
forces the DHCP server to duplicate the
X4’s WAN IP address to the local client
computer; thus, only one computer on the
LAN can access the Internet at a time.