ZyXEL Communications 100IH Network Router User Manual


 
Prestige 100 and 100IH ISDN Router and Router/Hub
Dial-In Server Configuration 6-3
6.2 LAN-to-LAN Server Application
Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide
access for the workstations on a remote network. For your Prestige to be set up as a LAN-to-
LAN server, you need to configure the Default Dial-In Setup to set the operational parameters
for incoming calls. Additionally, you must create a remote node for the router on the remote
network (see Chapter 4 - Remote Node Configuration).
An example of your Prestige being used as a LAN-to-LAN server is shown below.
Figure 6-2 Example of a LAN-to-LAN Server Application
PrestigePrestige
Remote Network Local Network
LAN-to-LAN
Server