Filter
Top Products
ZyAIR B-5000 Quick Installation Guide
4
2.2 Wireless Bridge Application
You can use the ZyAIR as a bridge or router to form a wireless point-to-point or point-to-multipoint
backbone connection.
With the bridge mode, you configure each ZyAIR to act as either a central bridge or a remote bridge. For
point-to-multipoint applications, all communications between network systems go through the central
bridge. See Figure 2 for an example. The headquarters ZyAIR is the CB (central bridge). The ZyAIRs A
and B are remote bridges at branch offices. The CB ZyAIR routes or bridges all communications between
the ZyAIRs. The ZyAIR is connected to an antenna, through an inline power injector (P) and through a hub,
switch or router to a network.
Figure 2 - Wireless Bridge Application
Please see the section on example scenarios in Part I and IV of the ZyAIR User’s Guide for more
information on network topologies.